TransCore MPRX, System Manual

Page: 22 / 208

System Guide
TransCore Proprietary 1–4
Licensing Requirements
An FCC license provides the user with the legal authorization to operate the MPRX on the
licensed frequencies at the site specified in the license. Only an authorized installer or
service technician can set the RF frequency of the MPRX to the frequency specified in the
FCC site license. No end-user-operated controls exist on the MPRX.
The FCC license may provide the user with protection and authorization to maintain
the system should any other RFID product be used in the licensed area after the MPRX
equipment is installed.
Users of the MPRX in the United States must obtain a license from the FCC. In the United
States, the authorized modulated (SeGo protocol operation) frequency band for this
product is 911.75 to 919.75 MHz and the authorized continuous wave (AAR-formatted
operation) frequency band is 902.25 to 903.75 MHz and 910.00 to 921.50 MHz.
The user is responsible for filing the FCC license according to FCC regulations, but the
TransCore dealer will provide assistance and support as necessary to complete these
forms. Forms are available online at the FCC internet site http://wireless.fcc.gov/uls. For
further information on obtaining the license contact TransCore.
Caution
This equipment can be set to frequency ranges outside those authorized for use in
the U.S. by the FCC. Users in all countries should check with the appropriate local
authorities for licensing requirements.
Technical Support
Authorized dealers and distributors are responsible for the direct support of all customers.
Authorized dealers and distributors needing technical support can contact:
Technical Support: Phone: (505) 856-8007
Web: transcore.com/rfidsupport
Please be prepared to answer a series of questions that are designed to direct you to the
best support resource available.