TransCore MPRX, System Manual

Page: 194 / 208

System Guide
TransCore Proprietary D–16
Command Name Code Reader Message
Comm port parameters display 522 MAIN Bx Sx Px D0 B0 = 110
B1 = 300
B2 = 1200
B3 = 2400
B4 = 4800
B5 = 9600
B6 = 19.2
B7 = 38.4
S0 = one stop bit S1 = two stop
bits P0 = no parity
P1 = even P2 = odd
D0 = EOL delay of 0 ms
Comm protocol display 525 ECPS Px Txx Xx S0 P0 = basic
P1 = ECP
P2 = data inquiry Txx = ECP
timeout ms = 50 * xx
TFF = disabled ECP timeout X0
= no flow control
X1 = software flow control S0 =
SOM character is #
Command mode switch 01 Done
Data inquiry protocol enable 613 Done
Data mode switch 00 Done
Date set 21 Done
Default operating parameters
load (except RF operating
frequency) 66F Done
eATA disable 488 Done if MPRX model supports
this tag protocol. Error if tag
protocol is unsupported.
eATA enable 489 Done if MPRX model supports
this tag protocol. Error if tag
protocol is unsupported.
Echo disable 6170 Done
Echo enable 6171 Done