TransCore MPRX, System Manual

Page: 159 / 208

System Guide
TransCore Proprietary 11–2
Chapter 11 AT5720 Check Tag-to-MPRX Assembly
This document describes the procedures to assemble and connect a
check tag assembly to a Multiprotocol Reader Extreme (MPRX).
Required Supplies
Before assembling the check tag antenna kit, make sure you have the necessary
supplies and tools for this task. Check Tag Kit (TransCore P/N 19114-00).
Table 11 – 1 lists
the kit parts.
Table 11 – 1 Check Tag Kit Parts List
Quantity Description
1 Terminal connector strip (9 position)
2 Self-tapping screw
1 Plastic connector housing sleeve
2 Plastic nut cap with rubber insert
1 Nylon closing cap
1 Check Tag Assembly Instructions
You need the following additional materials and/or tools to complete the installation.
• AT5720 Check Tag(s)
• Jeweler flat-blade screwdriver
• Standard tools (Phillips screwdriver, wire stripper, crescent wrench)
• Multiprotocol Reader Extreme