TransCore MPRX, System Manual

Page: 122 / 208

MPRX Reader
TransCore Proprietary 7–35
Auxiliary Reader Control — Command Group 8
Group 8 commands provide control of reader functions, such as the sense input lines.
8110 Switch on RF Port 0, Fire Off Check Tag Address 0 on Check Tag
Pin 0
Command #8110 turns on RF Port 0 and sends the command on Ctag pin 0 to fire off Ctag
address 0.
8111 Switch on RF Port 1, Fire Off Check Tag Address 1 on Check Tag
Pin 0
Command #8111 turns on RF Port 1 and sends the command on Ctag pin 0 to fire off Ctag
address 1.
8112 Switch on RF Port 2, Fire Off Check Tag Address 0 on Check Tag
Pin 1
Command
#8112
turns on RF port2 and sends the command on Ctag pin 1 to fire off Ctag
address 0.
8113 Switch on RF Port 3, Fire Off Check Tag Address 1 on Check Tag
Pin 1
Command #8113 turns on RF Port 3 and sends the command on Ctag pin 1 to fire off Ctag
address 1.
8142X Set Check Tag Character on Check Tag Pin 0
Command
#8142X
sends the command on Ctag pin 0 to set the Ctag character.
8143X Set Check Tag Character on Check Tag Pin 1
Command
#8143X
sends the command on Ctag pin 1 to set the Ctag character.
8150 Set Check Tag Address to 0 on Check Tag Pin 0
Command
#8150
sets the check tag address to 0 on check tag pin 0.
8151 Set Check Tag Address to 1 on Check Tag Pin 0
Command
#8151
sets the check tag address to 1 on check tag pin 0.
8152 Set Check Tag Address to 0 on Check Tag Pin 1
Command
#8152
sets the check tag address to 0 on check tag pin 1.
8153 Set Check Tag Address to 1 on Check Tag Pin 1
Command
#8153
sets the check tag address to 1 on check tag pin 1