TransCore MPRX, System Manual

Page: 110 / 208

MPRX Reader
TransCore Proprietary 7–23
I ID (64 bits)
E Enabled
F Full transaction (eATA)
D Disabled
TMM0 Fixed
577 Report Buffered Handshakes
Command #577 reports the buffered handshakes. When in MPRX mode and/or if antenna
multiplexing is enabled, the response is
Reader response:
HDSH C0 <ww> C1 <xx> C2 <yy> C3 <zz>
where
ww count from port 0
xx count from port 1
yy count from port 2
zz count from port 3.
Reader Control Functions — Command Group 6
Group 6 commands set reader control functions such as reader ID, communication
protocol, output pulse, and RF control.
60NN Set Reader ID Number
Command
#60NN
sets the reader ID that will be sent in the auxiliary data field (command
#311
). Uppercase or lowercase characters are allowed for
NN
; for example, hex digits A
though F or a through f
where NN = 00 to FF (hex for 0 to 255, factory default = 00). Reader
response:
Done
610 Select Basic Communication Protocol (Factory Default)
Command
#610
enables the basic communications protocol.
Reader response:
Done
611 Select Error Correcting Protocol
Command
#611
enables the error correcting protocol.
Reader response:
Done