TransCore MPRX, System Manual

Page: 109 / 208

User Guide
TransCore Proprietary 7–22
552 Display Antenna Multiplexing Mode
Command #552 displays the antenna multiplexing mode When the MPRX mode is enabled,
the response is
Reader response:
MUX x<0 to 3> <MPRX>
where
x
= 0 antenna multiplexing disabled, RF on port 0 only
x
= 1 antenna multiplexing between RF ports 0 and 1 when sense0 active
x
= 2 antenna multiplexing between RF ports 0 and 1 when sense0 active and RF
port 2 when sense1 active
x
= 3 antenna multiplexing between RF ports 0 and 1 when sense0 active and RF
ports 2 and 3 when sense1 active
MPRX = MPRX mode selected
560 Request Sensor Status Change
Command
#560
displays the sensor status change reporting. Not applicable to the MPRX
Reader response:
SSTC E<0 to 1> M<0 to 3>
where
E0
Input status change reports disabled (factory default)
E1
Input status change reports enabled
M0
Reporting disabled (factory default)
M1
Changes on input0 reported
M2
Changes on input1 reported
M3
Changes on either input reported
For example, if factory default settings are assigned, the reader message is
SSTC E0 M0
which means that input status change reports are disabled on both input0 and input1.
570 Display Operating Mode Status
Command
#570
displays the currently selected tag read mode. Reader response:
ATA:<E, D> eGo:<I, F, D> SeGo:<I, F, D> IAG:<E, D> Sort:<E, D>
TMM0
where