TransCore MPRX, System Manual

Page: 107 / 208

User Guide
TransCore Proprietary 7–20
530 Display RF0 Filter Status
Command #530 displays the parameter set for the RF input, including the selected unique
ID code criteria ( #410N Select Unique ID Code Criteria) and the valid ID code criteria,
which are fixed at one acquisition.
Reader response:
RF0S U<0 to 4> V<0 to 3>
where
U0
One ID separation (factory default)
U1
Two ID separations
U2
Three ID separations
U3
Four ID separations
U4
Transmit all IDs
V0
Valid ID code criteria of one acquisition (factory default)
V1
Valid ID code criteria of two acquisitions
V2 Valid ID code criteria of three acquisitions
V3
Valid ID code criteria of four acquisitions
For example, if factory default settings are assigned, the reader message is
RF0S U0 V0
which means separation of one ID for uniqueness filtering and a valid ID code criteria of one
acquisition.
534 Display Tag Translation Mode Status
Command
#534
displays tag translation mode status, enabled or disabled. If tag
translation mode is enabled, incoming full-frame tags in AAR or ATA format are translated
according to ISO standards. Refer to
“452 Disable Tag Translation Mode (Factory
Default)” on page 7–13 and “453 Enable Tag Translation Mode” on page 7–13 for more
information.
Reader response:
TT <0 to 1>
where
0 tag translation mode disabled
1
tag translation mode enabled