
Encompass 4 Reader System Guide
TransCore Proprietary.
7–126
Table 36 Output Pulse Duration Commands
Command
Duration (ms)
670
4
671
8
672
12
673
16
674
20
675
24
676
32
677
40
678
48
679
60
67A
76
67B
152
67C
228 (factory default)
67D
300
67E
376
67F
752
Additional IDs may be acquired during the selected output pulse duration; however, the timing restarts
upon each successive ID acquisition. This command should be used with discretion. For example, when
the tag acquisition interval is short compared to the selected pulse duration, distinct pulses may not be
generated.
Reader response:
Done or Error
690N Select Presence Without Tag Report Option
Command
#690N
enables or disables the presence without tag report option. If the presence without tag
reporting option is enabled using command
#6901
, input reports are transmitted when a tag presence is
detected without the subsequent acquisition of a valid tag. The value for N specifies the reports as shown
in
Summary of Contents for encompass 4
Page 207: ......