•
Liquid thread locker
•
Liquid-tight flexible electrical conduit (UL listed)
•
Straight, insulated liquid-tight, 1-in electrical conduit connector
•
Concrete (if needed)
•
Test tag and reader to verify tag operation
Installation Procedures
This section provides procedures for the following tasks:
•
Preparing the antenna site
•
Securing the antenna hardware connections
•
Fastening the antenna to the trackbed
Note:
To install the AA3233 Antenna correctly, follow these procedures in the order in which they
are presented. The AA3233-002 has an integrated check tag. Instructions that pertain only to the
installation of the check tag will be be noted.
Preparing Antenna Site
Before you install the antenna, use the following instructions to prepare the site where the antenna is to
be installed.
1. Identify the approximate antenna location on the track bed. The location should be centered
between the rails. Mark parallel and perpendicular centerlines on the track bed (
).
Installation Guide
5
