manualshive.com logo in svg

Transcend TS-ABX31, User Manual, Page: 18 / 44

Share
Download
Transcend TS-ABX31 User Manual Download Page 18

           HARDWARE INSTALLATION           

14

1 .   P S / 2   M o u s e

2. PS/2 Keyboard

3 .   U S B 1

3 .   U S B 2

4. 

5 .   C

TS-ABX31 Exter

Parallel Port (Printer)

C O M B

5 .   C O M A

rnal Connectors

2.15 External Connectors

There are 5 kinds of external connectors on the motherboard.

1. PS/2 Mouse Connector (6-pin MOUSE)

             The onboard PS/2 mouse connector is a 6-pin Mini-Din connector marked “MOUSE”

             The view angle of drawing shown here is from back panel of the housing.

2. PS/2 Keyboard Connector (6-pin KB)

             The onboard PS/2 keyboard connector is a 6-pin Mini-Din connector marked “KB”. The

             view angle of drawing shown here is from back panel of the housing.

        3. Universal Serial BUS USB Ports 1 & 2 (Two 4-pin USBs)

            You can attach USB devices to the USB connector. The motherboard contains two USB

             connectors, which are marked as “USB”.

        4. Parallel Port Connector (25-pin PRN)

             The onboard printer connector is a 25-pin D-type connector marked “PRN”.  The view

             angle of drawing shown here is from back panel of the housing.

        5. Serial Port Connectors (Two 9-pin COMA/COMB)

             The onboard serial connectors are 9-pin D-type connectors on the back panel of

             motherboard. The serial port1 connector is marked as”COMA” and the serial port2

             connector is marked as ”COMB”.

Summary of Contents for TS-ABX31













































Reviews:

No comments