10
Set Date (A16)
Your indicator will keep track of the current date for you, which can then be printed on the print ticket.
Use this procedure to set the date, which must be set in mm/dd/yy format. For example, for January
7, 2008, you would enter 010708. For November 30, 2008 you would enter 113008.
1.
While in the User Menu mode, scroll to "A 16", and then scroll down once using the ZERO key to
enter the date entry menu.
2.
The display will momentarily show "ENT DT", followed by a value with one flashing digit. This
value will be the current date in mm/dd/yy format.
3.
Use the four directional keys to adjust the displayed value to the actual date value. Increase the
flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the ZERO key.
Pressing the PRINT key or the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the date value. The display will
show "End DT" momentarily, and then revert back up to A16.
Edit Output String (A31)
Please see Appendix B for more information.
EXITING THE MENUS
Exit any configuration menu by moving the slide switch to its original position. The display will go through
a digit check, and then settle into Normal Operating mode. All front panel keys will now return to their normal
mode of operation.
