User Manual
27
Using the same operating procedures, you can check “E- Month”, “E-Year”.
5.4.3. Inverter state
Press the “OK” key, and then you will find a pull-down menu. Please move the
cursor to “inverter state” by pressing the “up” or “down” key, and then press
“enter” key, the related information at AC,DC,
frequency and temperature will be
shown. If you press “ESC” key, you can exit this interface.
Figure 5-13 Inverter state Interface
5.4.4. Device Information
Press the “enter” key and you will find main menu. Move the cursor to “Device
information” by pressing the “up” or “down” key, and then press the “enter” key,
you will find the information of “Device Model”, “SN”, “HMI/SW”, “CU/SW”
etc. Press the “esc” key exit this interface.
Figure 5-14 Device Information
5.4.5. log Information
Press the “enter” key and you will find main menu. Move the cursor to “Log” by
pressing the “up” or “down” key, and then press the “enter” key, you will find the
log fault column, including time fault happened and fault info. Press the “esc” key
exit this interface. “Log fault” contains Error information of the latest 20 times; if
you need more information, please derive from DLU.
