Trane Voyager TC Series, User Manual

Page: 63 / 108

RT-PRC024-EN
63
Performance Data
(20 Tons High Efficiency)
Table 45. Evaporator Fan Performance 20 Tons T*D241C Dehumidification (Hot Gas Reheat Option) Downflow
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
5-HP Standard Motor & Field Supplied
Fan Sheave
(i)
(i)
Field Supplied Motor Sheave IVP34 Required. Field Supplied Belt may be necessary.
5-HP Standard Motor & Drive & Field
Supplied Low Static Drive Fan Sheave
5-HP Standard Motor & Drive
4000* — — — — 441 0.77 477 0.90 511 1.03 543 1.17 573 1.32 603 1.47 631 1.63 658 1.78
4800* 414 0.84 452 0.99 487 1.13 519 1.27 550 1.43 579 1.59 607 1.74 635 1.91 660 2.08 686 2.26
5600* 469 1.25 504 1.45 536 1.61 566 1.78 594 1.95 620 2.12 647 2.30 672 2.49 696 2.67 720 2.87
6400 525 1.80 558 2.03 588 2.24 615 2.42 641 2.61 666 2.80 689 3.00 713 3.20 736 3.41 758 3.62
7200 583 2.50 613 2.75 641 3.02 666 3.23 690 3.44 714 3.65 736 3.86 758 4.08 778 4.30 799 4.53
8000 641 3.37 669 3.64 695 3.93 719 4.21 742 4.45 763 4.67 785 4.91 805 5.14 825 5.38 844 5.62
(ii)
(ii)
5-HP Standard Motor & High Static Drive.
8800 699 4.42 725 4.72 750 5.03 773 5.35 794 5.65 815 5.91
(iii)
(iii)
7.5-HP Standard Motor with Field Supplied Motor Sheave IPV50 required. Field Supplied Belt may be necessary.
835 6.15 854 6.41 873 6.66 892 6.93
9600 758 5.67 782 6.00 805 6.32 827 6.68 848 7.04 867 7.35 886 7.63 904 7.90 923 8.18 941 8.46
7.5-HP Oversized Motor & Drive
Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
5-HP Standard Motor & Drive 5-HP Standard Motor & High Static Drive
4000* 684 1.94 708 2.10 731 2.27 753 2.43 775 2.60 795 2.77 814 2.94 834 3.12 852 3.29 870 3.47
4800* 711 2.44 735 2.63 758 2.81 780 3.00 802 3.19 823 3.38 843 3.58 864 3.78 882 3.97 901 4.17
5600* 743 3.06 765 3.26 787 3.46 809 3.67 830 3.88 850 4.09 871 4.31 890 4.53 910 4.75 929 4.98
6400 779 3.82 800 4.04 821 4.26 841 4.48 861 4.70 881 4.93 899 5.16 919 5.41 938 5.66 956 5.90
7200 819 4.76 840 5.00 859 5.23 879 5.47 898 5.72 916 5.96 933 6.19 952 6.46 968 6.70 987 6.97
8000 863 5.87 881 6.12 900 6.38 918 6.64 936 6.90 954 7.16 971 7.42 988 7.69 — — — —
8800 909 7.19 927 7.46 944 7.73 961 8.01 978 8.29 994 8.56 — — — — — — — —
9600 — — — — — — — — — — — — — — — — — — — —
7.5-HP Oversized Motor & Drive
For Standard Evaporator Fan Speed (RPM), reference Table 50 .
For Standard Motor & Low Static Drive Accessory Fan Speed (RPM), reference Table 51 .
For Oversized Evaporator Fan Speed (RPM), reference Table 53 .
Fan motor heat (MBH) = 3.15 x Fan BHP.
Notes:
Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.
Refer to Table 54 to determine additional static pressure drop due to other options/accessories.
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all
cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor
failure. Our product's warranty will not be affected.
* For 4000, 4800 and 5600 CFM, unit applications below 320 CFM/Ton are only applicable to TCD models only (No Gas Heat). See below for restrictions.
• Electric heaters restricted on applications below 320 CFM/Ton.
• Dehumidification (Hot Gas Reheat) or TXV with Frostat and Crankcase Heaters are required on applications below 320 CFM/Ton.