Trane TXK, Installation Operation & Maintenance

Page: 12 / 30

MS-SVX10A-EN 12
Remote Control Description
Functions of the Remote Control Unit
Notes:
1) Ascertain that no obstructions are in the path between the remote control and the unit.
2) Do not drop or toss the remote control.
3) Do not expose the remote control to direct sunlight.
4) On a restart of the unit, it can automatically resume the previous running mode prior to being
stopped. The oudoor unit starts a bit later.
TEMP+ & TEMP- Button:
In the COOL, DRY, FAN or
HEAT modes, press either of
these two buttons to set the
desired temperature. Tem-
perature setting range is 16°C
- 30°C. Temperature setting
can be saved in the sistem’s
memory under each mode.
FAN SPEED Button:
At start-up, in the AUTO, COOL,
FAN, or HEAT modes, press
this button to select the Fan
Speed:
Auto, Low, Medium or
High. In the DRY mode, the fan
speed is Low. The FAN SPEED
setting can be saved in the
system’s memoriy under
various modes.
MODE Button:
At unit start-up, press this
button to select the operating
mode: AUTO, COOL, DRY, FAN,
HEAT.
CLOCK Button:
To adjust the CLOCK function,
press this button once. The
clock icon on the screen will
flash. To increase the hours,
press and hold the TIME+
button and the seconds and
minutes digits will advance to
the desired setting. To
decrease the hours, press
and hold the TIME- button and
the seconds and minutes
digits will turn back the time to
the desired setting. After
reaching the desired time,
press the CLOCK button once
again to confirm the setting.
SLEEP Button:
In the COOL, DRY or HEAT
modes , press this button
once to start the SLEEP
function. To stop this function,
press this button once again.