
TK 56917-11-MM-EN
17
Operating Instructions
Charging a EPJ
1. Verify pilot light is illuminated on GFCI outlet.
N
No
otte
e:: If the GFCI pilot light is not illuminated, see
“Quick Troubleshooting Guide,” p. 22
2. Connect pallet jack to the GFCI outlet located inside the truck or trailer.
3. L
Le
ea
av
ve
e E
EP
PJ
J p
pllu
ug
gg
ge
ed
d iin
n w
wh
hiille
e iin
n ttrra
an
nssiitt — unplug EPJ when in use.
N
No
otte
e:: Ensure power cable does not interfere with door operation or by product moving in and out of the truck or trailer.
Figure 6. EPJ Shown Connected to GFCI Outlet
RCS1476
IMPORTANT NOTE
Depleting the EPJ battery and then trying to rapidly recharge it is not recommended.
The EPJ should be connected to GFCI while in route and between each stop to maintain the battery charge. This allows the majority of the
charging to occur when the truck is in route.