ACC-SVN264B-EN
5
General Information - FIAECON102*
This section covers installation of low leak economizers for
6 to 12.5 ton downflow units in the B and C cabinet
(digit 39 = B,C).
Inspection
1. Unpack all components of the kit.
2. Check carefully for shipping damage. If any damage is
found, report it immediately, and file a claim against the
transportation company.
3. Visually inspect the components for shipping damage as
soon as possible after delivery, before it is stored.
Concealed damage must be reported within 15 days.
4. If concealed damage is discovered, stop unpacking the
shipment.
5. Do not remove damaged material from the receiving
location. Take photos of the damage, if possible. The
owner must provide reasonable evidence that the damage
did not occur after delivery.
6. Notify the carrier’s terminal of damage immediately by
phone and by mail. Request an immediate joint inspection
of the damage by the carrier and the consignee.
Note:
Do not attempt to repair any damaged parts until the
parts are inspected by the carrier’s representative.
Parts List
Table 1.
Parts list
Qty
Description
1
Low leak economizer
1
Mixed air sensor
1
Barometric relief mist filter
1
Top filler panel
(a)
(a) Model number digit 30 = D, E or F.
1
Top hood mist filter
1
Bag parts
1
Two piece hood
16
Self-drilling screws (33 Std. and 14 TEK)
2
Hood triangles
2
Smoke detector grommets
1
Hood base
26
Feet gasketing
1
Barometric relief hood
1
Powered exhaust gasket
1
Barometric relief triangle
1
Smoke detector bracket
1
FA hood front support
2
FA hood mist eliminator side retainer
1
FA hood mist eliminator rear block-off
