Trane CXPA 050, Installation Operation & Maintenance

Page: 7 / 36

SSC-SVN001H-EN 7
Upper wooden
base
Lower wooden
base
Lifting sling
Spreader
bar
Wooden
box
Lower wooden
base
WITH BOX WITHOUT BOX
Transport and
Handling
Handling and Displacement Ins -
tructions
Proceed as follows to transport and
handle the unit:
1. Check the manual or nameplate
for the actual equipment weight.
2. For all units, place lifting cables
or chains under the skid. Other lif-
ting methods may cause serious in-
juries or equipment damage.
3. Do not allow chains, slings or ste-
el cables to touch the unit in order
to avoid damages or accidents. Use
suitable spreader bars as shown in
the figure.
4. The module packaging material
should only be removed after the
unit is placed at the final mounting
location. Take proper care while
handling the equipment.
5. During transportation, do not
swing the unit more than 15º (fifte -
en grades) in relation to the vertical
position.
6. Always test-lift the unit to ensure
proper balance and stability before lif-
ting the unit to the mounting location.
7. For horizontal displacement, use
rollers of equal diameter under the
wooden base.
Fig. 01 - Transport and Handling Instructions.
TRANSPORT
WARNING!
!
Each of the cables, chains or slings
used to lift the unit must be capable
of supporting the entire weight of
the unit.
WARNING!
!
The lifting equipment capacity
must exceed the unit weight by
a proper safety factor in order to
avoid death or equipment damage.