Installer's
Guide
Start Control Kit
BAYKSKT257, 258, 259, 260, 263, 265 & 266
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT —
This Document is customer property and is to remain with this unit. Please return to service information
pack upon completion of work.
18-HE12D7-5A-EN
INSTALLATION:
Mounting Start Control Kit Components
1. Be certain power to unit is DISCONNECTED.
2. Remove cover panel on control box compartment.
3. Open Start Control Kit and remove kit assembly.
4. With the screws provided, secure Start Control kit
assembly in control compartment as illustrated. (See
Figure 1)
Wiring Start Control Kit Components
5. Connect the color coded start control wires with quick
connect 1/4" flag terminals to the contactor and capaci
-
tor, as illustrated. (See Figure 2)
6. To replace control compartment panel reverse proce-
dure used to remove these items.
7. Re-connect power, which was disconnected in step 1.
①
WARNING:
HAZARDOUS VOLTAGE - DISCONNECT POWER BEFORE SERVICING
