ARTC-SVX006A-EN
15
Rigging, Lifting, and Moving the
Heat Pump
The air-to-water modular heat pump can be delivered to the
customer’s site as individual modules or as factory
assembled single units, depending on customer
requirements and preferences. Limitations on the methods
and materials that can be used to rig, lift, or move a heat
pump or an individual module include:
•
Maintain the module in an upright position at all times.
•
Certain configurations of modules can be top-heavy.
Move modules slowly with consideration for each
module’s center-of-gravity.
•
Rig, lift, and move by strapping and lifting using a
properly configured floor jack or fork lift or by overhead
means.
•
Position lifting beams to prevent lifting straps from
rubbing or contacting module side panels or electrical
boxes.
•
Do not use cables, chains, or any other type of
metalized strapping to lift a module.
•
Do not push a heat pump module while directly in
contact with the floor using manual or mechanical
means.
Figure 2.
Recommended heat pump rigging
Summary of Contents for Arctic Thermafit AXM
Page 69: ...ARTC SVX006A EN 69 Notes...
Page 70: ...70 ARTC SVX006A EN Notes...
Page 71: ...ARTC SVX006A EN 71 Notes...
