![Trane Technologies Thermo King TriPac Evolution Operator'S Manual Download Page 36](http://html1.mh-extra.com/html/trane-technologies/thermo-king-tripac-evolution/thermo-king-tripac-evolution_operators-manual_1150435036.webp)
36
TK 55711-19-OP-EN
Power Inverter (Option)
A 12 Vdc to 120 Vac inverter is available as an option for TriPac. The inverter
is normally connected directly to the truck batteries.
Inverter features will vary, depending upon the brand and model used.
Typically, when the inverter detects an AC load, it automatically turns on and
converts DC to AC power for onboard 120 Vac devices. If the TriPac is
enabled and the inverter draws truck battery voltage down below the voltage
limit established for the installation, the TriPac will start and attempt to
recharge the truck batteries back to the level specified. If the TriPac is not
enabled, the inverter could drain the truck batteries below the level required
to start the truck or the TriPac.
Manufacturer’s instructions for the optional inverter are provided separately.
It is important to read and follow those instructions for proper use of the
inverter.
Inverter Operation Hazards
D
DA
AN
NG
GE
ER
R
R
Riisskk o
off IIn
njju
urry
y!!
Do not use the Thermo King Power Inverter in life support or health care
applications where a malfunction or failure of the inverter could cause
failure of a life support device or medical equipment or significantly alter
the performance of that equipment.
D
DA
AN
NG
GE
ER
R
H
Ha
azza
arrd
do
ou
uss V
Vo
olltta
ag
ge
e!!
Potentially lethal voltages exist within the power inverter as long as the
battery supply is connected. During any service work, the battery supply
should be disconnected.
D
DA
AN
NG
GE
ER
R
R
Riisskk o
off IIn
njju
urry
y!!
Do not connect or disconnect batteries while the power inverter is operating
from the battery supply. Dangerous arcing may result.