TK 56702-1-OP-EN
49
Figure 52.
Pretrip Submenu
Main Menu Choices
Each of these Main Menu choices will be explained later in this section:
L
La
an
ng
gu
ua
ag
ge
ess:: If more than one language is enabled, this will be the first menu
item to appear. If only one language is enabled, this menu will not appear.
The Language Menu allows the operator to select a language from a list of
up to 11 languages at one time. All subsequent displays are shown in the
selected language. Three different language packages with a total of 23
languages are available. English is the default language and is provided in
each of the packages.
A
Alla
arrm
mss:: Allows the operator to view all alarms, and allows most alarms to
be cleared. If only one language is enabled, this will be the first menu item to
appear.
H
Ho
ou
urrm
me
ette
errss:: Allows the operator to view the unit hourmeters that have the
view feature enabled in the Guarded Access Menu. If the view feature for a
particular hourmeter is not enabled, that hourmeter will continue to
accumulate time but cannot be viewed from the Main Menu. However, all
hourmeters can be viewed from the Maintenance Menu, even if they are not
enabled.
M
Mo
od
de
e:: Allows the operator to change the unit operating modes if allowed.
Not all modes may appear depending on the settings selected from the
Guarded Access Menu and the HMI Control Panel software version.
•
Turn Off CYCLE-SENTRY Mode/Turn On CYCLE-SENTRY Mode (If CYCLE-
SENTRY is Off unit runs in Continuous).
•
Allow Keypad Lockout to be selected.
•
Start Sleep Mode.
P
Prre
ettrriip
p:: Allows the operator to start a Pretrip Test. If an alarm is active, the
Pretrip Test is not allowed and the operator is prompted to clear the alarm
(s).
