BAS-SVX44C-EN
31
Functions
2. Next, touch in the fan selection box to put the thermostat into
TOV Temporary Override Mode
and
to step to the next available setting as shown below.
3. Refer to the next section,
Temporary Override (TOV) Setup
to set overrides or touch
to cancel
and return to the
Home
screen.
Temporary Override (TOV) Setup
TOV allows the user to temporarily override the scheduled temperature setpoint and/or fan settings. There
are two ways to enter TOV Mode from the Home screen:
•
Quick TOV
: Touch the Occ (
) or Unocc (
) icon from the Home screen. A TOV session will start
up using the last occupied schedule setpoint settings, the last occupied fan setting, and the default
TOV time period (
Option Number 0230
). Touch
OK
or wait for a 20-second time out to put the
thermostat into quick
TOV Active Mode
;
OR
•
User Configurable TOV
: Touch either the Up or Down arrow to blink the
setpoint
for 20 seconds. Touch
of the Up or Down arrows within 20 seconds to change the setpoint and put the thermostat into TOV
Setpoint Change Mode;
OR
Touch the Fan to blink the present Fan setting for 20 seconds. Touch the Fan area within 20 seconds
to change the Fan setting and put the thermostat into
TOV Setpoint Change Mode
.
In
TOV Setpoint Change Mode
, further adjustments can be made to the setpoint or Fan mode with the
Up, Down, or Fan areas.
Note:
For Auto H/C systems, use the cool mode icon (
) or the heat mode icon (
) to toggle
between cool and heat setpoints respectively.
•
To adjust the TOV time period:
•
Touch the clock icon (
) to enter
TOV Time Setup Mode
. The left/right arrow (
or
) will
toggle between Days/Hours and the middle Up/Down arrows (
or
) will increment or
decrement the time.
Note:
A second touch of the clock icon (
) will put the thermostat into
Hold Mode
which
holds the TOV settings indefinitely until canceled by the user. Additional touches of the
clock icon (
) will toggle the thermostat between
DAYS/HOURS
and
Hold
.
•
Toggle back to readjust the setpoint(s) by touching the thermometer icon (
).
•
Touch
area to activate the desired settings. Active TOV is indicated by a solid non-blinking
hourglass ( ).
Note:
Desired settings are also activated after a 20-second time out.
•
To
Cancel
the TOV time period, touch
at any time to cancel and exit
TOV Mode
.
General Notes:
•
TOV setup has three modes:
TOV Setpoint Setup
,
TOV Time Setup
, and
TOV Active
.
•
If Fan is enabled, then TOV Fan setting can be changed in either
TOV Setpoint Mode
or
TOV Time
Setting Mode
.
•
If a TOV is in active status, then those TOV settings become the starting setpoints if entering into a
new User Configurable TOV session.
•
Fan icons do not display on the LCD screen if the system is not configured for fans.
•
The
confirm icon is not displayed when the user is in
TOV Active Mode
.
•
When starting/activating TOV, the
displays solid indicating that TOV is ACTIVE.
On Mode:
Arrows Flash
Auto Mode:
Auto Flashes
B C
E
F G
Summary of Contents for BAYSTAT152A
Page 53: ...BAS SVX44C EN 53 Notes...
Page 54: ...54 BAS SVX44C EN Notes...
Page 55: ...BAS SVX44C EN 55 Notes...
