5’ Dynamic LED Whip
Mounting Base
Flag
Remote
RGB Module
Flag Mounting Accessories
TPWHIPS5
DYNAMIC RGB LED WHIP
Please read instructions manual before commencing.
ADDITIONAL PARTS REQUIRED
BEFORE YOU START
INSTALLATION
5 Amp Fuse & Fuse holder
Zip-Ties
Find an appropiate location for the whip to be mounted.
To mount, use a 13mm (1/2”) hole saw to make a mounting hole
or fabricate a mounting bracket.
To make mounting the whip easier disconet the LED section from the base.
To do this pull up on the lock ring collar and seperate(IMAGE 1).
Note: When attaching the LED section back to the base pull up on the
lock ring collar and push back onto the base.
Confirm the silver lock ring is not visible when reconnected
(if visible push the lock ring collar down).
Find an appropriate location to mount the RGB module.
Make sure the cable from the module will reach the whip.
If more length is required use optional extension lead
(Part# TPRGBEXT4 -
Sold Seperatly).
OPTIONAL
Switch
Relay
13mm Hole Saw
Use supplied mounting
accessories to secure
flag to the whip.
OPTIONAL
THIS PRODUCT IS FOR OFF-ROAD USE ONLY
!
KIT INCLUDES
Attach whip and test.
To attach or release the whip
from the base, pull up on the
locking collar.
When re-attaching, make sure
silver lock ring is not
visible.
IMAGE 1
1
2
3
LOCK RING COLLAR
SILVER RING
BASE
