TrailPRO TPRGBW12 Instruction Manual Download Page 1

SPXRGBUBKIT

 

 

 

 

WHAT’S INCLUDED

 

 

12

12

12

 x CREE LED Pods With 3mtr Lead

 x Flat Rubber Mounting Pads 

 x Curved Rubber Mounting Pads 

1 x Bluetooth RGB Control Module

 - Mounting Accessories

TPRGBW12

SPXRGBUBKIT

OPTIONAL 

EXTENSION CABLE

(TPRGBEXT4)

KIT INCLUDES

Please read instruction manual before commencing.

ADDITIONAL PARTS REQUIRED

BEFORE YOU START

3 Amp Fuse & Fuse holder

Wire

Zip-Ties

OPTIONAL

Switch 

Relay

RGBW LED ROCKLIGHT KIT

INSTALLATION

Find a location for the RGBW module 

(avoid mounting the module in a location 

that get’s extremely hot or wet).

 Make sure all 

12 cables from the light pods will reach the module 

(each light pod has a 3 meter lead). 

If more length is required use 

optional extension lead 

(Part# TPRGBEXT4 - 

Sold Separately

). 

Find an appropriate location for the light 

pods using either the supplied FLAT or 

CURVED rubber mounting pads (IMAGE 1).

The lights should be mounted where they 

will not

 

come into contact with tyres, suspension or where 

they will rub/drag along the ground. 
Run and connect the light cables to the RGBW module.

Be mindful to keep the cable away from any moving parts

or where the cable can be pinched or snagged (zip ties are

your friends). 

(E1) DO NOT 

connect the extension leads (TPRGBEXT4) together.

(E2) ONLY ONE 

Extention lead (TPRGBEXT4) can be used per

output from the module. 

1

2

3

THIS PRODUCT IS FOR OFF-ROAD USE ONLY

!

!

12 CONNECTORS

ON ACTUAL PRODUCT

The TPRGBW12 can be set up 

as a: 4, 6, 8 or 12 configuration.

EXT.

TPRGBEXT4

EXT.

TPRGBEXT4

E1

E2

ONE

 EXTENSION

LEAD (TPRGBEXT4) PER 

CONNECTOR OUTPUT

Reviews: