TrailMax TD-40-T, Manual, Page: 17 / 62

page 17
TD-40-T
®
Section2. Maintenance
2.0 Periodic Maintenance
New Trailer Break-in
50 to 100 miles- re-torque wheel flange nuts- see page 28.
1000 miles- check axle alignment and re-torque suspension fasteners- see page
22.
Pre-Trip Inspection
Lube wear areas on hitch.
Examine frame and tongue members for evidence of damage or cracked welds.
Check suspension for bent or broken springs, damaged components, and loose
or missing fasteners.
Check wheel hub oil levels and for evidence of leaking wheel seals.
Check tire inflation pressures- see page 29.
Check hitch for damage or stress and verify correct hitch height.
Check lights for correct operation.
Quarterly or 10,000 miles
Check wheel flange nut torques- see page 28.
Check brakes for adjustment- see page 32.
Semi-Annually or 25,000 miles
Lubricate jack- see page 19.
Re-torque suspension fasteners- see page 22.
Inspect and lubricate brakes and linings- see page 35.
Lubricate tilt deck hinges- see page 19.
Replace wheel bearing lubricant (heavy duty/off-road service)- see page 27.
Annually or 100,000 miles
Replace wheel bearing lubricant (standard duty service)- see page 27.
Special-
Accident or Overload- check all structural components for damage. Check tires
and wheels for damage. Check axle alignment.
Rear Impact- check impact guard components for damage- see page 20.
Skidding- check tires for flat spots.
Maintenance
M
A
I
N
T
E
N
A
N
C
E