Trail Tech STRIKER Page 44 User Manual Download

Page: 44 / 44

LIMITED WARRANTY

Within one year from the date of original purchase, Trail Tech will repair or replace, at its

option, any Trail Tech powersport computer which is deemed defective in workmanship

or materials.

Please contact Trail Tech or the dealer where the item was purchased for assistance.

Damage or injuries resulting from negligence or misuse are not covered by this warranty.

Incidental or consequential damages are speciﬁcally excluded.* This warranty gives

you speciﬁc legal rights. You may also have other rights which vary from state to state.

*Because some states do not allow the exclusion of incidental or consequential damages,

this exclusion may not apply to you.

MADE IN AMERICA

Trail Tech and Striker are trademarks of Trail Tech, Inc.

www.trailtech.net

360-687-4530

Summary of Contents for STRIKER













































Search results

Summary of Contents for STRIKER

Reviews:

Related manuals for STRIKER

Brands by name

Popular brands

Trail Tech STRIKER, User Manual

Search results

Summary of Contents for STRIKER

Reviews:

Related manuals for STRIKER

Brands by name

Popular brands