Carefully insert the temperature probe into fins of radiator.
Make sure that the probe is lined up parallel to the fins to avoid damage. If it is too difficult to
press in, use a small wood or plastic block against the back side of the sensor while guiding the
sensor straight into the radiator.
(See above photos)
TIP: To Compensate for the influence of ambient air passing across the sensor, apply thermal grease (includ-
ed in kit) into the gap between the fins of the radiator where the sensor will be installed. It is important to
place the grease only in the gap. Grease on the surface of the radiator will attract dirt and reduce function.
010-ELV-170
Digital Gauge & Fan Kit Installation Guide
Tech Support: 360-687-4530
DIGITAL GUAGE & FAN KIT
INSTALLATION GUIDE
Mount Kit
7051-FNMK
Power Harness
(to TTV Gauge)
732-WH3
Fan Harness
(From TTV to Fan)
732-WH4
Temperature
Sensor
7500-3006
Temperature
Extension
V300-72
TTV Digital Gauge
732P-SV0
Cooling Fan
7051-FN2
TEMP SENSOR INSTALLATION GUIDE
