GPS tracking system
10
14. Shut down 3 LEDs:
Command:
LED1
The device will reply “LED off” and later LEDs will stop flashing, but device is actually running.
To turn off this function, please send
LED0
15. AGPS
Command:
AGPS1
A-GPS is for accelerated positioning and helping position a device when GPS signals are weak or not available. GPS satellite signals
may be impeded by tall
buildings, and do not penetrate building interiors well. A-GPS uses proximity to cellular towers to calculate position when GPS
signals are not available.
To turn off this function, please send
AGPS0
16. Fall detection
Command:
FL1
Device will reply “fall detection on” and will send alarm to all registered phone numbers if detect fall.
A simple fall may cause a devastating consequence. A Fall Sensor can help you get immediate help without missing any important
moment.
To turn off this function, please send
FL0
17. Smart Power saving mode
Command:
PS1
Device built-in motion sensor. Under this mode, GSM chip always on, GPS chip activates by motion or incoming call or SMS, GPS chip
off when its no motion
or calling or SMS. You won't waste any battery life when device isn't moving.
Under normal use, battery can last 4 ~ 10 days.
To turn off this function, please send
PS0
