Wiring the Solar Panel to the Sign (1-wire EZ connector)
The solar panel should be angled 15 degrees above the latitude of
the installation site. For example, if the latitude of the installation
site is 45 degrees then the solar panel should be installed at an
angle of 60 degrees, as shown.
You can easily obtain the latitude of the installation site from
mapping software or for free by doing an internet search for
"latitude
your_city
" where
your_city
is the name of the city or
region where the panel is being installed.
Wiring the Solar Panel to the Sign (1-wire EZ con-
nector)
As shown in the following images, the solar panel and the sign come pre-wired with quick connectors to
allow for a simple installation.
Figure 18: Solar panel front view
Figure 19: Solar panel rear view with connector.
Figure 20: Sign and panel connectors
Figure 21: Sign and panel connectors - close up
W
ARNING
:
To prevent damage to the solar charger, connect the Solar Panel to the sign
before
connecting the battery connectors.
To wire the solar panel to the sign:
1.
Align the solar panel and the sign connectors, then insert the sign connector into the solar panel
connector.
SafePace® Evolution11 Installation Guide
p. 21
