TRAQC-20 LPC
TRAQC-20 LPC 0 13-08-2019 Page: 5
1.2 Description
The Traqc-20 LPC is used for the:
·
Simple generation of positive and negative reference pressures
·
Pressure measurement of positive and negative pressures
·
Differential pressure measurement
·
Identification of leaks in test samples
Scope of delivery
·
Traqc-20 LPC
·
Power supply unit
·
Operating instructions
·
Calibration certificate per DIN EN 10204 (optional DKD/DAkkS certificate)
Cross-check scope of delivery with delivery note.
1.3 Symbols used
Warning for conditions or practices that could result in personal injury or loss of life
or in damage to the product or other property.
Attention signal or remark
DANGER!
...identifies hazards caused by electric power. Should the safety instructions not be
observed, there is a risk of serious or fatal injury.
