User manual
Traqc-2 PCHP
User manual Traqc-2 PCHP rev.0
Pagina 7 van 16
3.
About the Traqc-2 PCHP
3.1
Functions of the Traqc-2 PCHP
The Traqc-2 PCHP is a portable pressure calibrator to perform a calibration, a simple pressure measurement or a
leak test. The Traqc-2 PCHP is suitable for generating pressure with the built-in hand pump and volume controller.
This pressure will appear on the display. The display can be set to psi, bar or kPa by briefly pressing the push button.
The pressure indication on the display can be zeroed by pressing the push button for a longer period of time.
3.2
Terms of use
3.2.1
Control panel and layout
ID
Function
Description
HP
Hand pump
For the purpose of making pressure
VC
Volume controller
For the purpose of accurate pressure settings
PS
Pressure switch
May or may not allow reduced pressure to test
connection 1 & leak test function
TEST 1
Test connection 1
Test point to which an UUT
can be connected
TEST 2
Test connection 2
Test point to which an UUT
can be connected
OFF / ON
On / off switch
Switching the Traqc-2 PCHP on or off
ZERO / UNIT Push button
For the purpose of zeroing the display or changing the
measuring unit
PT
Pressure limiting valve
Measuring the pressure
PSS
Pressure reference sensor
Protecting the pressure against overpressure
Underlined components are visible