
User manual
Traqc-2 PCHP
User manual Traqc-2 PCHP rev.0
Pagina 5 van 16
2.
Safety symbols, notices and warnings
This warning symbol indicates danger for the system and material if the respective safety precautions are
not taken, or indicates that danger of injury for persons and the environment and/or considerable material
damage (mortal danger, danger of injury) will occur if the respective safety precautions are not taken.
This warning symbol indicates danger by explosion for the system and material and the operator and
bystanders if the respective safety precautions are not taken.
This notice symbol does not indicate safety notices but information for a better understanding of the facts.
2.1
Responsible use of the Traqc-2 PCHP
To ensure safety, the operator must make sure that the following conditions are met:
•
The system is used properly, no dangerous media are used and that all technical specifications are observed;
•
The system is in perfect operating condition;
•
The operation manual is legible and accessible to the user at the system’s location;
•
The system is operated, serviced and repaired only by authorized and qualified personnel;
•
The user receives instruction on industrial safety and environmental protection, and is knowledgeable of all
operating instructions and safety notices relevant to the current procedure.
2.2
General safety instructions
The system should be operated only by trained personnel who are familiar with this manual and the
operation of the instrument.
The battery of the Traqc-2 PCHP should be charged regularly. Only use the supplied USB cable for this,
which may be connected to a USB charging point that delivers a maximum of 500 mA/hr to prevent
overloading the internal electronics.
A condition for trouble-free and safe operation of this system is proper transport, proper storage,
installation, assembly and proper use as well as careful operation and maintenance.
Any operation not described in the following instructions should be prohibited. The system must be
handled with care required for an electronic precision instrument (protect from humidity, impacts, strong
magnetic fields, static electricity and extreme temperatures). Do not insert any objects into the instrument.
2.3
Warnings and caution notices
WARNING: PRESSURE! Pressure gases are potentially hazardous. Energy stored in these gases can be
released suddenly and with extreme force. Pressure systems should be assembled and operated only by
personnel who have been trained in proper safety practices.
Do not disconnect any pressure connection of the Traqc-2 PCHP when a measurement of any kind is in
progress. Physical injury may exceed when process connections will be disconnected, caused by the
expanding gas.
CAUTION: Pressure testing with compressed gases can lead to additional risks due to release of stored
energy (e.g. burst of system, flying objects). Please take appropriate measures (e.g. shielding, use of
personal protective equipment (PPE)) to prevent hazardous situations which could result in human injuries.
CAUTION: Use proper pressure medium. Use only clean, dry air or nitrogen gas. This instrument is not
designed for oxygen use.