Package 1 of 1 contains:
1 - Assembled ventilator
1 - Bag assembly containing:
1 - Drain spout assembly
(HRV units only)
4 - Hanging straps
1 - Installation manual
Installation Tools
•
tin snips
•
large zip ties
•
assorted screw drivers
•
fabric flexible duct
•
electric drill
- class
II
rated
•
hammer
•
mastic tape
•
wire strippers
•
alum. foil duct tape
•
knife
•
zip ties
•
caulking gun
•
1/2” I.D. drain hose
•
smoke pencil
Balancing Tools
•
Pitot Tube Balancing Kit
[Case, 8 ft. vinyl tubing, Pitot tube,
magnehelic gauge (0 - 0.25”), and
mounting plate]
•
Pitot Tube with instructions
and Digital Manometer (with resolution of
0 - 0.25” - must read to 1/100ths of an inch)
Optional Accessories
•
20 Minute Fan Timer
•
Wall Mounted Dehumidistat
•
Weather hood Kit
•
Round Diffuser
4” (100mm)
5” (127mm)
6” (150mm)
8” (200mm)
•
Kitchen Grille
- may be required by code for kitchen applications
- contains removable grease filter
Heat Recovery Ventilators (HRV) are designed to pro-
vide fresh air while exhausting an equal amount of stale
air.
The HRV is equipped with an aluminum core. The
device uses the stale air that is being exhausted to con-
dition the fresh air as it is being brought in.
These instructions are intended as a general guide and do
not supersede local codes in any way. Consult authorities
who have jurisdiction before installation.
Shipping and Packaging List......................................................1
Required Tools ...........................................................................1
Application .................................................................................1
General ......................................................................................1
Engineering Data ....................................................................2-3
Clearances & Requirements ......................................................4
Installation...............................................................................4-7
Application Illustrations .........................................................8-10
Electrical .................................................................................11
Remote control devices............................................................12
Wiring the Controls ..................................................................13
Operation .................................................................................14
Changing Speeds ....................................................................14
Fan Speed DIP Switch Settings ...............................................14
Wiring Diagrams .................................................................15-16
Interlocking HRV to Furnace ....................................................17
Defrost Operation.....................................................................18
Defrost Cycle DIP Switch Settings...........................................18
Dehumidistat Operation ...........................................................18
Airflow Balancing ................................................................19-20
Troubleshooting........................................................................21
Maintenance ...........................................................................22
Shipping and Packing List
Application
General
Table of Contents
Required Tools
* LEAVE FOR HOMEOWNER
NOTE: Due to ongoing research and product development, specifications,
ratings and dimensions are subject to change without notice.
TW-TPD-001
0307
TM
HEAT RECOVERY VENTILATOR
HEAT RECOVERY VENTILATOR
MODELS RNC5-TPD, RNC5-TPF
INSTALLATION INSTRUCTIONS
