Product Code: 6046
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
SAFETY OPERATNG INSTRUCTIONS
Do not exceed the products rated maximum load capacity.
Always distribute objects evenly on the Workshop Trolley. Uneven weight distribution
could cause tipping.
Do not lean or climb onto the Workshop Trolley.
Only use this device for the purpose for which it has been designed.
Do not modify any component of this equipment.
When servicing, use only Tradequip identical replacement parts. Use of any other parts
will void the warranty.
Only use on a flat surface capable of supporting the Workshop Trolley and its rated
maximum capacity load. It is easy to lose control of the Workshop Trolley if attempting to
pull a load on a sloping or uneven surface.
Use the right product for the job. There are certain applications for which the Workshop
Trolley was designed. Do not modify the Workshop Trolley and do not use the Workshop
Trolley for a purpose for which it was not intended.
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
The Tradequip 32 Bin Polyethylene Workshop Trolley is widely used for collecting and
storing parts and/or tools when servicing vehicles and machinery etc.
2.
ASSEMBLY
Unpacking:
after removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. The packaging materials
(Polyethylene bags, polystyrene etc.), must be disposed of in an appropriate refuse
collection container. These materials must not be left within the reach of children as they
are potential sources of danger.
Assembly
:
Assemble the Cart:
1.
Place the bases of the four Legs (3,4) into the corners of the Lower Tray (5). The
flange on each Post will only fit into certain corners.
2.
Insert Carriage Bolts (6) down through the holes in the bases of the Posts (3,4).
3.
Attach Castors (7,10) to Carriage Bolts (6) using Split Washers (8) and Nuts (9). For
best operation, the two Straight Castors (10) go on the same end of the cart, and the
two Swivel Castors (7) go on the other end.
4.
Place the Upper Tray (2) upside down on the work surface. Turn the Handle (1)
upside down with the cup holder toward the Tray and the hand holes on the outside.
5.
Place the Tray with the Handle firmly on top of the Legs (3,4). Position the Handle
above either the swivel or fixed castors, depending on operating preference.
