02/21
Product Code: 1055T
Made in China to TQB Brands Pty Ltd Specifications
Page 3
Visit us at www.tqbbrands.com.au
PRE-OPERATIONAL SAFETY CHECKS
•
Before using the wheel/tyre ensure it is in sound condition, and good working order.
•
Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate
the warranty. The nuts and bolts supplied with the crane are all high strength and should not be substituted for inferior types.
•
The use of portable automotive lifting devices are subject to certain hazards that cannot be prevented by mechanical means,
but only by the exercise of intelligence, care and common sense. It is therefore essential to have owners and personnel
involved in the use and operation of the equipment who are careful, competent, trained and qualified in the safe operation
of the equipment and its proper use. Examples of hazards are dropping, tipping, or slipping of loads caused primarily by
improperly securing loads, overloading, off-centred loads use on other than hard level surfaces and using equipment for a
purpose for which it was not designed.
•
Read, study, understand & follow all instructions before using.
•
DO NOT use (or modify) this product for any other purpose than that for which it was designed without consulting the
manufacturer's authorized representative.
•
DO NOT use with tandem and duplex wheel and tyre combinations.
•
Inspect the Tyre/Wheel Lifter before each use.
•
DO NOT use if damaged, altered, modified, in poor condition or unstable due to loose or missing components. Make
corrections before using.
•
User and bystanders must wear eye protection.
•
DO NOT exceed rated capacity.
•
Use only on a hard, level, dry concrete surface free from expansion joints and all obstructions.
•
DO NOT use with tyres that are wider than 12".
•
Before moving a load, secure the wheel/tyre assembly to the lift arm with the tyre restraint mechanism provided (tyre hold).
•
Lower load all the way before transporting.
•
DO NOT start the vehicle's engine or drive the vehicle when removing or installing wheel/tyre combinations with a Wheel/Tyre
Lifter.
•
Stay clear of lifted load.
•
When transporting a load, be sure not to make any sudden or abrupt stops as this may cause the telescopic lift arm assembly
to extend.
•
Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.
INTENDED USE
For the lifting, lowering, supporting and transporting of tyre and rim assemblies up to 50kgs and 300mm wide
STANDARD OPERATING PROCEDURE
DO NOT
use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
Safety glasses must be worn when operating this
equipment
Long loose hair must be contained when operating
this equipment
Safety footwear must be worn when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
DO NOT tilt the unit
