Oct-18
Product Code: 1026
Made in China to TQB Brands Pty Ltd specifications
Page 5
Visit us at www.tqbbrands.com.au
Attach the Fan Blade to the Fan Motor
a)
Rotate the fan motor shaft until the rebated flat area on the shaft is in the 12
o'clock position.
b)
Locate the lock screw in the fan blade coupling; whilst aligning the screw and
motor shaft rebated flat area push the Fan Blade (3) all the way onto the shaft
and firmly tighten the grub screw by rotating in a clockwise direction.
Attach the front Safety Grill to the Fan Motor
a)
Align the top locking clip on the Front Grill (2) to the top centre of the Rear Grill
(8) that has already been secured to the fan motor.
Lock the side and bottom clips in place.
b)
Secure the front & rear safety grills together using the fan grill securing hole in
the bottom of the fan grill by inserting the fixing screw and nut provided.
c)
Push the centre plate onto the front of the Grill with the TQ logo level or
horizontal.
d)
4.
OPERATION
Oscillating Control:
The oscillation pattern can be adjusted from 0-90 degrees. When the adjusting screw is
moved towards the rotating axle, the fan will oscillate less of an angle. The longer-the
distance from adjusting screw, the larger the oscillating angle will be. Before you change
the oscillating angle, disconnect the 240V power supply, then loosen the adjusting screw
and adjust to obtain a satisfactory angle.
Change of the wind direction:
If you want to change the direction of the air circulation, disconnect the power supply and
loosen the direction adjustment bolt to adjust the direction of the fan head to required
position and re-tighten the bolt. It is not necessary to move the base of the fan.
Head angle adjustment:
Disconnect the power, hold the head of fan, loosen the adjustment bolt and stopping
bolt, adjust the fan to satisfactory position and tighten up the two bolts. When adjusting
the angle of the fan, ensure to keep it within the groove of the lower connection.
If you
do not follow these instructions, the oscillating function may wear and stop working.
Adjustment of air volume
Turn the switch on the back of the fan head to control the operation of the fan to adjust
air volume, “1-3” speeds indicate different air volume.
