Item No. 0BL-00-012 Revised 07/19/2010 Copyright © 2008 Universal Metal Industries, Inc. Page 1
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
Trade-Wind
®
Designer Series Liners
Designer Series Models
Model
Width
CFM
Type of
Motor &
Blower
VSL430 BF
28
– 3/8‖
*
Remote
VSL436 BF
34 -
3/8‖
*
Remote
VSL442 BF
40 -
3/8‖
*
Remote
VSL448 BF
46 -
3/8‖
*
Remote
VSL430-4 BF
28 -
3/8‖
410
Internal
VSL436-4 BF
34 -
3/8‖
410
Internal
VSL442-4 BF
40 -
3/8‖
410
Internal
VSL430-6 BF
28 -
3/8‖
660
Internal
VSL436-6 BF
34 -
3/8‖
660
Internal
VSL442-6 BF
40 -
3/8‖
660
Internal
VSL448-6 BF
46 -
3/8‖
660
Internal
VSL442-12 BF
46 -
3/8‖
1360
Internal
VSL448-12 BF
46 -
3/8‖
1360
Internal
*These models connect to an In-Line, Roof or
Wall-Mounted Remote Blower. The blower used
determines the CFM.
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Installer: Please leave Installation Instructions with the range hood liner.
Owner:
Please keep Installation Instructions for local electrical inspector’s use and for future reference.
WARNINGS:
Must be followed carefully to avoid personal injury.
IMPORTANT:
Must be followed carefully to avoid damage or incorrect installation.
TIPS:
Contain helpful information to facilitate installation.
READ AND SAVE THESE INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
b) Before servicing or cleaning unit, switch power off at service panel, lock service panel, and lock the service
disconnection means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
