1
2
3
4
4G Mega Internet Kit ‐ Quick Start Guide
Place the kit on a flat stable surface (such as a tabletop
or shelf
) near the center of your
space, as close to your WiFi
devices
as possible for the best coverage.
Do not place the kit
inside a metal box or metal-lined closet. The kit must be placed in an unobstructed
location without walls, pillars, or thick objects near it which can affect the radio-frequency
signals.
Unlatch and securely store the front and back covers of the kit’s case.
Locate the power cord on the back. Plug the cord into
any standard 110V/10A 3-prong wall electric outlet.
Press the silver POWER button (see picture).
The power button’s LED should turn solid green.
Wait 1 minute.
For Wireless (WiFi) Connections:
Using your device’s wireless network connection program,
find
and connect to the network name listed below:
Custom
Network Name (SSID):
Password:
For Wired Ethernet Connections:
Plug in your cat5 Ethernet cable(s) into any of the 22 available
ethernet ports on the switch. The router will recognize each
hard-wired device and issue it a dynamic IP address (DHCP).
Add-On WiFi Access Points (Optional):
Plug in a cat5 Ethernet cable into any of the 22 available
ethernet ports. Walk the cable to your adjacent room and
plug it into the WiFi AP. The router will recognize each hard-
wired device and issue it a dynamic IP address (DHCP).
POWER Button
Front
Ethernet
Ports
WAN
Ports
or
Default
Network Name (SSID): Guest Network
Password: guest12345
