TracVision M1 User’s Guide
40
Chapter 5 - Troubleshooting
System Status Lights
Three status lights on the front of the interface box indicate the current
status of the system and can help you identify problems (see
Figure 19).
Figure 19 System Status Lights
During normal operation, all three status lights should be lit green.
The following tables explain what the different light conditions
indicate.
VOLTAGE Light
The table below explains what the VOLTAGE light indicates.
Status Lights
Light is...
Indicates
Description
Off
Off
Interface box is off (power switch is
off) or no power input
Green
OK
Good power (10-16 VDC at interface
box)
Green,
flashing
Cable Open
Open detected in antenna cable
(check the antenna coax connection)
Orange
Low Power
Low power (9-10 VDC) at interface
box)
Red,
flashing
Bad Power
Insufficient power (less than 9 VDC
or more than 16 VDC input)
