TracVision C3, Installation Manual

Page: 4 / 24

5
Follow the steps below to remove the mounting
plate.
a. Remove the eight screws and washers
securing the radome to the baseplate (see
Figure 5).
b. Carefully lift up the radome until clear of the
antenna assembly and set aside in a safe
place.
c. Using a 1/2" wrench or nut driver, remove
the six bolts, nuts, and washers securing the
mounting plate to the baseplate (see
Figure 6).
NOTE: Be sure to keep the bolts in case the antenna
needs to be shipped to another location.
d. Remove the mounting plate and set it aside
for now (see Figure 7).
Figure 5: Removing the Radome
Radome
Screw and
Washer (x8)
Baseplate
Figure 6: Mounting Plate Bolts (Top View)
1
2
3
4
5
6
Figure 7: Removing the Mounting Plate
Remove the Mounting Plate 3