49
Maintenance
Or find and change this line in your config.g file which you can access through the
Web interface > Settings >
System Editor
Change the M579 X0.997 Y1.009 line to
M579 X0.9988 Y1.0057
8.5
Material usage and storage
When you have multiple opened spools of filament, you must store them properly.
It may affect its quality and usability, if the filament is not correctly stored.
To preserve the optimal conditions of your filament it is important that you store them:
Cool (below 30 degrees Celsius) and dry (Humidity below 50%)
Out of direct sunlight
In a resealable bag or box
If the filament is exposed to a higher humidity the quality of the filament can be affected.
You can store the material in a resealable bag or box, including some silica gel.
