TracPhone FleetBroadband, User Manual

Page: 63 / 146

Chapter 3: Operating the IP Handset
52 IP Handset functions
Quick settings
To control the volume in the earpiece
To adjust the voice volume during a call (with the display in the main screen),
press

or

on the keypad.
To use hands-free operation
To enable hands-free operation during a call, use the right select key to select
Handsfree . To go back to hand-held mode, press the right select key again.
In hands-free mode the sound is routed to a speaker, so that you can use the
phone without holding it close to the ear. You can adjust the volume with

or

as described in the previous section.
Handset in cradle:
You can also make a hands-free call by leaving the handset in the cradle while
making the call. Similarly you can answer a call using hands-free mode by
leaving the handset in the cradle while answering the call.
In both cases, the default function is as follows:
• If you remove the handset from the cradle during the call, the mode will
automatically change to hand-held.
• When the handset is out of the cradle in hand-held mode, the call will be
terminated when you put the handset back in the cradle.
• When the handset is out of the cradle in hands-free mode, you can put it
back in the cradle without terminating the call.
Note
You can change this default function under Settings > Cradle , if you
want the handset to be independent of the cradle. For further
information, see
To set up the function of the cradle on page 71.