TracPhone FleetBroadband User Manual Download Page 61

Page: 61 / 146

Chapter 3: Operating the IP Handset

IP Handset functions

3. You must verify the string. Compare your

own string with the peer string.

Example:

Say the first 2 symbols and the

peer (i.e. the person called) says the last 2
symbols.

If the comparison of the SAS is ok, press

Yes.

4. The line is secure and the display shows

Secure

and a Padlock. Voice streaming is

encrypted and decrypted.

Note

If the 4-digit SAS is

not identical

press

when asked to confirm

SAS authentication. The secure
session is aborted and the call is
terminated.

Note

The IP Handset supports one secure
call at at time. If there is a secure
call established and put on hold,
you cannot establish another secure
call.

Summary of Contents for FleetBroadband



















































































































































Search results

Summary of Contents for FleetBroadband

Reviews:

Related manuals for FleetBroadband

Brands by name

Popular brands

TracPhone FleetBroadband, User Manual

Search results

Summary of Contents for FleetBroadband

Reviews:

Related manuals for FleetBroadband

Brands by name

Popular brands