Chapter 4: Using the web server
Introduction to the web server
89
4444
Using t
h
e web ser
ver
Accessing and navigating the web server
To access the web server of the IP Handset
To access the web server from a computer, do as follows:
1. Start up your computer, the BGAN terminal and the IP Handset.
2. Connect your computer to the BGAN terminal using a standard LAN cable.
3. Connect your IP Handset to the BGAN terminal as described in
4. Open your browser on the computer and enter the IP address of the
IP Handset. You find the IP address in the handset menus under
Status >
Network information
.
Another way to access the web interface of the IP Handset is to click on the
page
SETTINGS > IP handsets > Configure
link in the web interface of the
terminal.
You can also see the IP address in the web interface of the terminal on the
page
SETTINGS > IP handsets
. Move the cursor to
Configure
for the
handset. Its IP address is shown in the status line in the lower left corner of
the window.
Note
The following procedure is valid if the IP Handset is used together
with a BGAN terminal.
Summary of Contents for FleetBroadband
