CAMON LS42B1 Lawn Scarifier
Page 14
www.tracmaster.co.uk
If using the collection bag, ensure that it is mounted correctly and is secure (see
Section 5.6 for more information).
Lift the operating lever to engage the rotor shaft and walk at a slow steady pace
pushing the machine ahead of you.
To turn the LS42 Lawn Scarifier 180
o
, release the operating lever, put light downwards
pressure on the handlebars and rotate the machine on its rear wheels.
Do not work the LS42 Lawn Scarifier on slopes of more than 20
o
and always work
across the slope, not up and down it.
Once the collection bag has become full, release the operating lever, turn off the
engine and ensure the rotor shaft has stopped turning. Remove the collection bag
and empty. Re-attach the bag securely and re-start the engine to continue scarifying.
Stop the engine and disconnect the spark plug wire before:
a) Clearing blockages;
b) Checking, cleaning or working on the machine;
c) After striking a foreign object;
d) If the machine starts to vibrate abnormally.
Stop the engine:
a) Whenever you leave the machine;
b) Before refueling.
Reduce the throttle setting during engine shut down and turn the fuel off on the
engine at the conclusion of scarifying.
6.5 Procedure for Unexpected Shut Down
Release the operating lever.
Switch the engine ON/OFF switch on the handlebars to the OFF (O) position (Figs.
6A or 6C).
Ensure the rotor shaft and blades have stopped rotating prior to moving the
machine.
6.6 How to Clear Unwanted Debris from the Underside of the Machine
Ensure that the engine has been turned off, remove the spark plug wire and the
rotor shaft has stopped turning.
Turn the engine fuel tap to the off position.
Attach a lifting hoist to the top handlebar and lift the machine so that it tilts forward
onto its front wheels. As the underneath of the chassis becomes exposed it is
possible to see and remove any unwanted debris.
!
