7
3.
The charger should now be connected as seen in the image above
(Colour of charging cable may be black or white).
4.
The USB end of the charger can now be connected to a USB port
or a USB to Mains adapter.
5.
When the Red light is solidly lit up the device is fully charged
Note:
You can save battery life by increasing the tracking interval in
the TrackiSafe app. As soon as the battery level is low, the red light
will start to blink.
FEATURES
ADDING CONTACTS
For this device you can select which “
C
ontacts” will receive certain
alerts, for example an alert for when the battery is low, an alert to
say the device is moving or an alert to say when the SOS key has
been pressed. These contacts will receive an alert by email. To add a
new ‘Contact’ to receive the email alert, complete the following
steps:
1.
In the Trackisafe app, go to ‘Settings’ by pressing on the “cog” icon
2.
Then tap on the "Share" icon next to the alert you wish to add a
new contact for. In this example we are adding contacts for the
“SOS
Key Pressed”
alert.
Summary of Contents for TRKM014 TS
Page 1: ...USER GUIDE For the Trackisafe Multi Tracker by Vodafone used in this PhD Study...
Page 2: ...2...
Page 5: ...5...
