Tracker OX 400 2020, Owner'S Manual

Page: 23 / 66

O
PERATION
21
OPERATION
SA F E TY
F ail u r e to op e rat e t he veh i c l e c orr ec tl y c an r e s u lt in a c ollision , loss of c ontrol , a cc i de nt
or rollo ve r , an d c a u s e s e rio u s in ju r y or de at h. F ollo w all op e ration pro cedu r e s in t h is
s ec tion of t he m an u al . R e a d an d c o m pl y w it h all saf e t y w arnin g s in t he saf e t y s ec tion of
t h is o w n e r’s m an u al .
B E F ORE INI T IAL USE
To prepare the new vehicle for operation, complete the following:
• Remove the protective plastic from the seats.
• Check for possible leaks that may have developed during shipment of the vehicle.
• Charge the battery.
• Fill the tank with the correct fuel.
• Perform the following pre-ride inspection.
PRE-RI D E INSPEC T ION
Inspect and verify that the vehicle is in safe operating condition before each use to decrease the risk of an accident.
Check the items in the table to help ensure safe and reliable operation.
It em C heck Pa ge
Brake system/pedal travel Check for proper operation. 50
Parking brake Ensure vehicle does not roll when the parking brake is engaged.
Front suspension Inspect. Lubricate if necessary. Check for loose or missing hardware.
Rear suspension Inspect. Lubricate if necessary. Check for loose or missing hardware.
CV boots Inspect for damage. Replace if necessary.
Steering Check for smooth and free operation.
Tires Check condition and pressure. 40
Wheel hardware Check for loose or missing hardware.
Frame hardware Check for loose or missing hardware.
Fuel and engine oil Check for correct levels. 38
Fluid leakage Inspect vehicle for leaks.
Switches Check operation.
Reverse warning alarm Check operation.
Air filter Inspect; clean or replace if necessary. 47
Headlights Check operation. 42
Brake light / taillights Check operation. 42
Starter / generator belt Check condition. 46