background image

After you have finished ironing:

Set the steam control to minimum.
Switch the iron off at the mains and unplug.
Stand the iron on its heel and let the iron cool down fully.

When the iron is cool: 

Invert the iron, open the filler and pour away the 
excess water from the tank. 
When pouring away the water, gently shake the iron 
to remove any loose particles from the tank.

Care and Cleaning

Unplug the iron from the mains and allow it to cool down fully.

Cleaning: 

To remove starch or other deposits from the soleplate, apply a small 

amount of mild cleaner to a damp cloth, forming a paste on the cloth. Gently rub 
the soleplate, then wipe with a moist cloth. 
The body of the iron may now be cleaned with a barely damp cloth and then dried 
thoroughly. Do not wet the appliance body, cord or mains plug.

CAUTION: 

Never use scouring pads, abrasives or harsh cleaners on the iron body or 

the soleplate.

Self Cleaning

This function removes the scales and minerals built up in the Steam Chamber. The 
iron will remain in the best condition if this function is performed at least once a 
month or more regularly depending on the hardness of the water.  

Half-fill the water tank.

1. 

Stand the Iron upright on its stand.

2. 

Set the steam control to minimum.

3. 

Turn the Temperature Dial to its maximum setting.

4. 

Plug the iron in and switch on. 

5. 

Wait until the iron is hot and the pilot light goes off. 

6. 

Wait for one more cycle; allow the pilot light to glow and go off.

7. 

Turn the Temperature Dial to minimum.

8. 

Unplug the iron from the mains supply.

9. 

Hold the iron horizontally over a sink.

10. 

Press and hold the Self-Cleaning button. Steam and boiling hot water will    

11. 
  drain from the holes on the soleplate washing away the scales and minerals    
  that have built up inside the Steam Chamber. Keep skin/body away from the   
  hot water - DANGER OF SCALDING!
12.  Gently shake the iron until the water tank is empty.
13.  When Self-Cleaning is complete, release the Self-Cleaning button and set the   
  iron back on its heel rest to cool down.
14.  When cool, wipe the soleplate clean with a soft cloth.

Care, Cleaning and Storage

Af

ter Use

Summary of Contents for IRTC09









Reviews: