Trace2O AquaSafe WSL50, Instruction Manual, Page: 26 / 52

4.3 Maintenance
The wheels should be periodically cleaned. When dry add a drop of lubricating oil to the wheel
axles to prevent seizing.
All screws in the case are fitted with anti-vibration nuts or secured with adhesive. However, after
transporting the case in a vehicle, it is suggested to check the integrity of the docking station and
any screws to ensure no damage has occurred and all electrical connections are secure prior to
use.
After a period of time replacement of the rechargeable lead acid batteries may be necessary. If so
these must be replaced with batteries of the same type as specified in section 5.1 and replaced as
a pair.
Should any fault occur please contact the Trace2o® Technical Team who will be more than happy
to advise you.
5.0 Technical Specification
5.1 Docking station:
Power supply
Input (Max) 12-28V DC, 48W ( via supplied Power supply
unit or vehicle charging lead only)
Output (Max) 12-28V DC, fused 24W
Fuse 2A Type T
Environmental
Operating temperature range 15 – 50°C
Storage temperature 0 – 70°C
Protection
Water ingress (Closed) IP68 (1hr, 0.2m)
Buoyancy 47Kg
Batteries Panasonic UP-VW1245P1 Rechargeable Lead
Acid Battery 12V, 7.8Ah