Trace2O AquaSafe WSL50, Instruction Manual, Page: 21 / 52

3.3.6 User defined Program (Fig 1.4)
This mode will run an incubation cycle at the user defined temperature for 24 hours. Adjusting the
user defined temperature is described in section 3.3.9. The 24 hour timer can be altered to any
setting between 0 and 24 hours. Adjusting the incubation time is described in section 3.3.8.
Pressing and holding the middle switch for 5 seconds will start the incubation cycle and the screen
will change to the following:
The asterisk preceding the temperature will switch on and off indicating the status of the heater.
To stop or pause the incubation cycle press and hold the middle switch again for 5 seconds. The
screen will display the following:
Pressing and holding the middle switch will restart the cycle or pressing the left switch will return
to the menu function screen.
20.9°C 20.9°C
U->##°C MEM OFF
*20.9°C 20.9°C
18:00 RUN! 24:00
*44.5°C 20.9°C
18:00 MEM 24:00